The US Grading Scale, Explained
One chart answers most "what letter is my score?" questions — but the chart is a convention, not a law, and the differences between schools explain most grading confusion. Here is the standard scale, what the pluses and minuses really mean, and how to tell which version your school uses. If you only need one score converted, the letter grade calculator reads it against both scales at once.
The standard scale
This is the chart most US schools start from, and the one every calculator on this site uses — so a letter means the same thing on every page here. The plus/minus scale splits each letter into three slices; the simple scale keeps one band per letter.
| Percent | Plus/minus | Simple | Grade points |
|---|---|---|---|
| 97–100 | A+ | A | 4.0 |
| 93–96 | A | A | 4.0 |
| 90–92 | A− | A | 3.7 |
| 87–89 | B+ | B | 3.3 |
| 83–86 | B | B | 3.0 |
| 80–82 | B− | B | 2.7 |
| 77–79 | C+ | C | 2.3 |
| 73–76 | C | C | 2.0 |
| 70–72 | C− | C | 1.7 |
| 67–69 | D+ | D | 1.3 |
| 63–66 | D | D | 1.0 |
| 60–62 | D− | D | 0.7 |
| Below 60 | F | F | 0.0 |
Read it by finding the highest band your score reaches: an 87 reaches the B+ floor of 87 but not the A− floor of 90, so it is a B+. Teachers grading a test by hand use the same bands in chart form — the easy grader prints that chart for any test length, on this scale or a custom one.
One thing the chart is not: official. There is no national US grading scale. No federal or state authority sets these cut-offs for every school — the chart above is simply the most common convention, the starting point most schools adopt and then adjust. That single fact explains almost everything else on this page.
Why your school's scale may differ
Districts and colleges set their own cut-offs, and they disagree more than most people expect:
- Some schools have no plus/minus at all. On the simple scale a 91 and a 99 are both just an A — the plus/minus slices never appear on the transcript.
- Some schools start an A at 93, not 90. That is the plus/minus chart read strictly: a straight A is 93–96, and a 91 is an A−. The same work earns a different letter purely because the line moved.
- Some scales are tighter everywhere. On a seven-point scale, where each letter spans about seven points, a C does not start until 77 — so a 70 that is a C− on the standard chart is a D there.
- Some letters are missing. Plenty of schools never award an A+, and a few do not award a D− either. Where an A+ exists, it is worth 4.0 at most colleges but 4.3 at some.
None of these schools is wrong. A letter grade is a label a school pins to a range of scores, and each school pins its own labels. The score underneath — the 91 — is the only part that travels unchanged.
What an A− actually is — and why there is no E
An A− is the lowest slice of the A range: 90–92 on the plus/minus chart, worth 3.7 grade points instead of the straight A's 4.0. It is still an A-range grade — the minus records that the work sat at the bottom of the band rather than the top. The pluses and minuses exist so a transcript can say more than five things: a B+ (87–89, 3.3) and a B− (80–82, 2.7) are both Bs, but they are not the same Bs.
And the F? F stands for fail — the one letter that is a word rather than a step in the alphabet. The usual explanation for the missing E is that E already had a job in the older grading schemes some schools used, where it stood for "excellent"; an E that meant failure would have confused everyone. Not every system skipped it, either: the College Board's own GPA chart prints the failing grade as "E/F", a leftover of the schools that did use E. So the honest answer is that F won, E mostly retired — and the alphabet was never the point.
Letter grades and GPA points
The right-hand column of the chart is where letters turn into a GPA. Each letter carries grade points — A 4.0, B 3.0, C 2.0, D 1.0, F 0.0, with the plus and minus slices a step above or below — and a GPA is the average of those points across your courses. The College Board publishes the same letter-to-points conversion, which is why a GPA from one school can be compared, roughly, with a GPA from another.
Worked example: four courses with grades A, B+, A− and B. Convert each to points — 4.0, 3.3, 3.7 and 3.0 — then add and divide: 4.0 + 3.3 + 3.7 + 3.0 = 14.0, and 14.0 ÷ 4 = 3.5. Read back the other way, 3.5 is a B+ average: B+ (3.3) is the highest letter whose points are at or below it. The letter grade calculator runs this conversion in both directions, with or without credit weighting.
School scale vs college scale
College uses the same letters and the same chart as the starting point — a college A is still the top band, and college GPA still runs on the 4.0 points column. The differences are in the local rules, and they are the same kinds of differences schools have between each other:
- Many colleges do not award an A+ at all, or award it but still cap its value at 4.0; a few award the 4.3.
- Some colleges do not award a D−, and a D that counts as a pass for the course may still be too low to count toward a major or a prerequisite.
- Colleges publish their scale in the course catalog and the registrar's pages — that document, not any general chart, is the authority for a college transcript.
- Because scales vary, colleges often recalculate applicants' high school GPAs onto their own common scale rather than comparing letters school by school — the College Board notes this is exactly why many colleges ask for your actual grades, not just your GPA.
So "the college scale" is not one scale either. It is the same standard chart, re-pinned by every college that uses it.
What to do when your report card uses a different scale
Three steps, in order:
- Find your school's own table. It lives in the student handbook, the course syllabus, or the registrar's pages. That table outranks every chart on the internet, including this one.
- Read your percent against your school's floors, not the standard ones. If your school starts a B+ at 88 instead of 87, your 87 is a B there no matter what a general chart says. The letter grade calculator shows both standard scales side by side, which makes the gap between the chart and your school's version easy to spot.
- Convert with the points column when a GPA is involved. If your school's letters differ but its points match the standard conversion, your GPA still travels. If both differ, report the GPA exactly as your transcript prints it — colleges expect that, and recalculate it themselves.
And for the classroom side of the same chart: a teacher grading on a seven-point or custom scale can set those thresholds directly in the easy grader, so the printed chart matches the syllabus instead of the default.
Frequently asked questions
What percentage is an A? On the simple scale, an A is 90 to 100. On the plus/minus scale a straight A is 93 to 96 — 90 to 92 is an A−, and 97 to 100 is an A+ at schools that award one. Some schools set their own line, so your school's published table is the version that counts for your transcript.
Is 70 a passing grade? Usually, yes. On the standard scale 70 is a C−, and at most schools a D is the lowest passing letter, so a 70 passes with room to spare. Two cautions: some courses — prerequisites and major requirements especially — demand a C or better to count, and on a seven-point scale a 70 is a D, one step above failing.
Do all US schools use the same grading scale? No. There is no national US grading scale — every district and college publishes its own cut-offs. That is why the same 91 can be an A at one school and an A− at another, and why colleges often recalculate applicants' GPAs onto a common scale instead of trusting each school's letters.